Skip to main content

Slide: one function for lag/lead variables in data frames, including time-series cross-sectional data

I often want to quickly create a lag or lead variable in an R data frame. Sometimes I also want to create the lag or lead variable for different groups in a data frame, for example, if I want to lag GDP for each country in a data frame.

I've found the various R methods for doing this hard to remember and usually need to look at old blog posts. Any time we find ourselves using the same series of codes over and over, it's probably time to put them into a function.

So, I added a new command–slide–to the DataCombine R package (v0.1.5).

Building on the shift function TszKin Julian posted on his blog, slide allows you to slide a variable up by any time unit to create a lead or down to create a lag. It returns the lag/lead variable to a new column in your data frame. It works with both data that has one observed unit and with time-series cross-sectional data.

Note: your data needs to be in ascending time order with equally spaced time increments. For example 1995, 1996, 1997.


Examples

Not Cross-sectional data

Let's create an example data set with three variables:

# Create time variable
Year <- 1980:1999

# Dummy covariates
A <- B <- 1:20

Data1 <- data.frame(Year, A, B)

head(Data1)
##   Year A B
## 1 1980 1 1
## 2 1981 2 2
## 3 1982 3 3
## 4 1983 4 4
## 5 1984 5 5
## 6 1985 6 6

Now let's lag the A variable by one time unit.

library(DataCombine)

DataSlid1 <- slide(Data1, Var = "A", slideBy = -1)

head(DataSlid1)
##   Year A B A-1
## 1 1980 1 1  NA
## 2 1981 2 2   1
## 3 1982 3 3   2
## 4 1983 4 4   3
## 5 1984 5 5   4
## 6 1985 6 6   5

The lag variable is automatically given the name A-1.

To lag a variable (i.e. the lag value at a given time is the value of the non-lagged variable at a time in the past) set the slideBy argument as a negative number. Lead variables, are created by using positive numbers in slideBy. Lead variables at a given time have the value of the non-lead variable from some time in the future.

Time-series Cross-sectional data

Now let's use slide to create a lead variable with time-series cross-sectional data. First create the example data:

# Create time and unit ID variables
Year <- rep(1980:1983, 5)
ID <- sort(rep(seq(1:5), 4))

# Dummy covariates
A <- B <- 1:20

Data2 <- data.frame(Year, ID, A, B)

head(Data2)
##   Year ID A B
## 1 1980  1 1 1
## 2 1981  1 2 2
## 3 1982  1 3 3
## 4 1983  1 4 4
## 5 1980  2 5 5
## 6 1981  2 6 6

Now let's create a two time unit lead variable based on B for each unit identified by ID:

DataSlid2 <- slide(Data2, Var = "B", GroupVar = "ID",
                    slideBy = 2)

head(DataSlid2)
##   Year ID A B B2
## 1 1980  1 1 1  3
## 2 1981  1 2 2  4
## 3 1982  1 3 3 NA
## 4 1983  1 4 4 NA
## 5 1980  2 5 5  7
## 6 1981  2 6 6  8

Hopefully you'll find slide useful in your own data analysis. Any suggestions for improvement are always welcome.

Comments

Tilly Tan said…
in your last exmample, what if i want to have the first 3 vairble in each group to have a lag value of 2, how can i do it?

Cheers,
Tilly
tttilly@gmail.com
Tilly, do you mean lag the A and B variables by 2? Or do you mean lag the first three rows for each group by 2?
Highgamma said…
Cool. I can use this to create returns for any time lag.
is this faster than using plyr as is what I'm currently using? plyr is beautiful but incredibly slow at times.

Sebastian for lags/leads with time- series cross-sectional data it will probably be as fast as plyr because it relies on ddply.

There might be a way to have slide use data.table rather than plyr. data.table is usually faster. I'll look into it. Thanks for the comment.
Anonymous said…
I'm using lagpanel() in the {simcf} package which makes sure that the panel structure is taken into account. Works perfectly! The package is described here: http://faculty.washington.edu/cadolph/?page=60
@politicalsciencereplication Thanks for the info. lagepanel looks pretty interesting. I like how it doesn't rely on ddply. Not sure if it does lead variables and has possibly less intuitive syntax for new users wanting to lag a variable in an existing data frame and return the new variable to the old data frame.

You've got a great blog by the way.
Fr. said…
I have submitted a fix that should make the function as quick as possible with plyr. On my training data, it is now as quick as lagpanel (which cannot do lead variables).
Thanks Fr. I just merged it in and the new version of DataCombine should be on CRAN shortly.
Danilo said…
This is by far the easiest function to lag and lead variables that I've seen. It works wonders! Thanks for lowering R's entry costs for newbies like me. :)
Thanks Danilo. Really glad that you found it useful.
Anonymous said…
Thanks very much for this package! I am using your slide function with fairly ordinary Time-series Cross-country dataset. When I use SlideBy=-1 (or SlideBy=1) it works fine, but when I put, say, SlideBy=-2 (or SlideBy=2) I get the following error:

Error in `[<-.data.frame`(`*tmp*`, , NewVar, value = c(NA, NA, NA, NA, :
replacement has 4098 rows, data has 4097

What do you think could cause this problem?
Hi homo-loquens

First of all, can you run the examples in the slide documentation ok?

If so then there might be some issue with your grouping or time variables. Not exactly sure without seeing the data.
Anonymous said…
Thank you, I think I have figured it out for the time being. Would post further if necessary.
Nancy Garero said…
There are lots of data scientist are here for solving your all type of data related problems, but the selecting of best data scientist from the variety of different scientist is also a big problem for us because we need the best data solution provide on very cheap rate. So this https://activewizards.com/ can help you better to find the best and cheap data scientist for your work.
Hi Christopher
I really like your slide function! However, I'm getting kind of annoyed about the naming of lag variables where the "-" confuses other functions. Could this possibly be changed into some other naming such as lagivar where i is the lag number and var is the variable name?
Best, Christoffer
When I use slide to construct lagged x, the resulting variable is x-1. When I try to use the dataframe in other functions this name does not work. I could not find to rename it either. Please help.
Rahul Kumar said…
Very interesting blog post.Quite informative and very helpful.This indeed is one of the recommended blog for learners.Thank you for providing such nice piece of article. I'm glad to leave a comment. Expect more articles in future. You too can check this R Programming tutorial for updated knowledge on R Programming.
https://www.youtube.com/watch?v=rgFVq_Q6VF0
Unknown said…

Worthful Data Science tutorial. Appreciate a lot for taking up the pain to write such a quality content on Data Science course. Just now I watched this similar Data Science tutorial and I think this will enhance the knowledge of other visitors for sure. Thanks anyway.:-https://www.youtube.com/watch?v=gXb9ZKwx29U&t=237s
nikitha josh said…
I have gone through your blog, it was very much useful for me and because of your blog, and also I gained many unknown information, the way you have clearly explained is really fantastic. Kindly post more like this, Thank You.
best aviation academy in chennai
cabin crew course in chennai
diploma in airport management course in chennai
airport ground staff training in chennai
medical coding classes in Chennai
Fashion designing courses in Chennai
best interior design courses in chennai

shivani said…
A bewildering web journal I visit this blog, it's unfathomably heavenly. Oddly, in this present blog's substance made the purpose of actuality and reasonable. The substance of data is informative
Oracle Fusion Financials Online Training
Oracle Fusion HCM Online Training
Oracle Fusion SCM Online Training
anusha said…





MEAN Stack Training in Chennai MEAN Stack Training in Chennai with real time projects. We are Best MEAN Stack Training Institute in Chennai. Our Mean Stack courses are taught by Industrial Experts which would help you to learn MEAN Stack development from the scratch.
basha said…
Excellent blog I visit this blog it's really awesome. The important thing is that in this blog content written clearly and understandable. The content of information is very informative.
Magnificent blog I visit this blog it's extremely wonderful. Interestingly, in this blog content composed plainly and reasonable. The substance of data is useful.
Oracle Fusion HCM Online Training
Oracle Fusion SCM Online Training
Oracle Fusion Financials Online Training
Big Data and Hadoop Training In Hyderabad
oracle fusion financials classroom training
Oracle Fusion HCM Classroom Training
oracle cpq online training / Oracle CPQ Class Room Training
Oracle Taleo Online Training

Popular posts from this blog

A Link Between topicmodels LDA and LDAvis

Carson Sievert and Kenny Shirley have put together the really nice LDAvis R package. It provides a Shiny-based interactive interface for exploring the output from Latent Dirichlet Allocation topic models. If you've never used it, I highly recommend checking out their XKCD example (this paper also has some nice background).LDAvis doesn't fit topic models, it just visualises the output. As such it is agnostic about what package you use to fit your LDA topic model. They have a useful example of how to use output from the lda package.I wanted to use LDAvis with output from the topicmodels package. It works really nicely with texts preprocessed using the tm package. The trick is extracting the information LDAvis requires from the model and placing it into a specifically structured JSON formatted object.To make the conversion from topicmodels output to LDAvis JSON input easier, I created a linking function called topicmodels_json_ldavis. The full function is below. To use it follow …

Dropbox & R Data

I'm always looking for ways to download data from the internet into R. Though I prefer to host and access plain-text data sets (CSV is my personal favourite) from GitHub (see my short paper on the topic) sometimes it's convenient to get data stored on Dropbox. There has been a change in the way Dropbox URLs work and I just added some functionality to the repmis R package. So I though that I'ld write a quick post on how to directly download data from Dropbox into R. The download method is different depending on whether or not your plain-text data is in a Dropbox Public folder or not.Dropbox Public FolderDropbox is trying to do away with its public folders. New users need to actively create a Public folder. Regardless, sometimes you may want to download data from one. It used to be that files in Public folders were accessible through non-secure (http) URLs. It's easy to download these into R, just use the read.table command, where the URL is the file name. Dropbox recent…